Welcome
Blog
News
Downloads
Links
FAQ
Guestbook
Forums
shaft line
SHAFT LINE FOR AMPHITRITE
Propeller :
RH50 ; three bladed propeller 21" (size) x 15" (pitch) ; Fa/F = 0,51 BAR ; drive ratio = 2,73:1.
www.francehelices.fr/standard-propellers.htm
Bracket :
no screws ; to be stratified (see dimensions under link below).
www.francehelices.fr/brackets.htm
www.amphs.org/articles.php
Shaft :
35 mm (diameter), 190 cm (length), cone sv.
www.francehelices.fr/shaft-lines.htm
When you hear an abnormal vibration, the shaft may be buckled ;
In this case, it is best to take it down and to check it on a lathe.
Rubber bearing :
L = 140 mm, outside diam. = 48 mm ; inside diam. = 35 mm.
www.francehelices.fr/rubber-bearings.htm
Stuffing box :
no precision now.
www.francehelices.fr/stuffing-boxes.htm
Coupling flange
: TP8 ; conical ; 4 screws 6 sides.
www.francehelices.fr/coupling-flanges.htm
Out of "First working order sheet of my old Perkins". Mindelo
Creation date : 18/05/2010 > 15:37
Last update : 15/06/2010 > 19:28
Category : Engine, gearbox, shaftline
Page read 10626 times
Top
© 2004-2022
Document generated in 0.17 second